Installation Procedure

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Install the generator and secure the generator with 3 bolts.
Tighten: Tighten the generator bolts to 50 N.m (37 lb ft).
Connect the battery positive cable to the generator and secure the positive cable with the nut (1).
Tighten: Tighten the generator positive cable nut to 9 N.m (80 lb in).

Fig 1: Rear Of Generator (Alternator) View
Courtesy of GENERAL MOTORS CORP.
Install the engine lift hook and secure the lift hook with 2 bolts.
Tighten: Tighten the bolts to 50 N.m (37 lb ft).

Fig 2: View Of Engine Lift Hook
Courtesy of GENERAL MOTORS CORP.
Install the A/C line bracket to the lift hook and secure the bracket with the bolt.
Tighten: Tighten the A/C line bracket bolt to 10 N.m (89 lb in).

Fig 3: View Of Engine Lift Hook
Courtesy of GENERAL MOTORS CORP.
Install the drive belt. Refer to DRIVE BELT REPLACEMENT in Engine Mechanical - 4.2L.
Connect the battery negative cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .