Installation Procedure

Hook the cable end into the lumbar mechanism.

Fig 1: Identifying Lumbar Mechanism Cable End
Courtesy of GENERAL MOTORS CORP.
Install the cable to the lumbar spring.

Fig 2: Locating Lumbar Mechanism
Courtesy of GENERAL MOTORS CORP.

Fig 3: View Of Lumbar Cable & Clip

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Install the lumbar cable (2) in the cable clip (1) located on the lower seat back.
Install 2 screws (1) securing the cable to the seat adjuster.
Tighten: Tighten the lumbar cable screws to 6 N.m (53 lb in).

Fig 4: Removing/Installing Seat Adjuster Cable Retaining Screws
Courtesy of GENERAL MOTORS CORP.
Install the seat back cover and pad. Refer to Seat Back Cover and Pad Replacement - Front .
Install the seat trim panel. Refer to Seat Cushion Outer Trim Panel Replacement .
Install the seat assembly to the vehicle. Refer to Seat Replacement - Front Bucket .