Brake Pressure Modulator Valve: Installation

To install, reverse removal procedure. Ensure brakelines are installed in original locations. If installing a NEW BPMV, ensure shipping plugs are removed from valve openings. Install NEW wave spring(s) in original location and position between EBCM and BPMV. Install EBCM to BPMV. Install 4 NEW top mounting screws and tighten in an "X" pattern. Install 2 NEW bottom screws and tighten. Tighten screws, nuts and brakelines to specification. See TORQUE SPECIFICATIONS .
Refill brake master cylinder reservoir, bleed brakes and check for leaks. See BLEEDING BRAKE SYSTEM . Turn ignition on, with engine off. Perform DIAGNOSTIC SYSTEM CHECK under DIAGNOSIS & TESTING.