LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2001 >> Intrigue GL >> Repair and Diagnosis >> External Pages >> Different car >> Section 587 (Power Seat System) >> Repair Instructions >> Lumbar Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the lumbar control switch to the seat.
  2. Connect the electrical connector (1) to the seat harness.
    Fig 1: Connecting Electrical Connector To Seat Harness
    G01833208Courtesy of GENERAL MOTORS CORP.
  3. Press the switch into the mount on the trim panel.
  4. Install the trim panel. Refer to Trim Panel Replacement - Front Seat .
    Fig 2: Pressing Switch Into Mount On Trim Panel
    G01833209Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals