LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2001 >> Intrigue GL >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System - Removal & Installation, Overhaul >> Fuel Systems >> Throttle Position Sensor >> Removal & Installation (Except 1.3L & 1.8L)

Removal & Installation (Except 1.3L & 1.8L)

  1. Turn ignition off. Disconnect harness connector from Throttle Position (TP) sensor. Remove TP sensor retaining screws. Remove TP sensor from throttle body.
  2. With throttle valve in closed position, install TP sensor on throttle body. Ensure TP sensor lever engages with drive lever on throttle shaft. Install retaining screws and harness connector. TP sensor is self-zeroing and is not adjustable.
scientia non olet · About LEMON Manuals