Fuel Pressure Regulator (Gasoline): Installation

To install, reverse removal procedure. DO NOT reuse "O" ring. Lubricate NEW fuel inlet "O" ring with oil and install onto regulator. Tighten screws to specification. See TORQUE SPECIFICATIONS .

To install, reverse removal procedure. Use NEW "O" ring onto fuel pressure regulator and fuel sending unit assembly. Tighten fuel sending unit assembly hold-down bolts to specification. See TORQUE SPECIFICATIONS .

To install, reverse removal procedure. Install NEW fuel line retainers into female portion of quick-connect fuel line fittings. Ensure chassis fuel feed and purge lines are routed on top of parking brake cable. Tighten screws to specification. See TORQUE SPECIFICATIONS .

To install, reverse removal procedure. DO NOT reuse "O" ring. Lubricate fuel inlet "O" ring with oil and install into regulator. Replace filter screen as necessary. Tighten screws to specification. See TORQUE SPECIFICATIONS .

To install, reverse removal procedure. DO NOT reuse "O" ring. Lubricate NEW fuel inlet "O" ring with oil and install into regulator. Replace filter screen as necessary. Tighten screws to specification. See TORQUE SPECIFICATIONS .

To install, reverse removal procedure. DO NOT reuse "O" rings. Lubricate NEW "O" rings with oil and install into regulator housing. Install snap ring.

To install, reverse removal procedure. DO NOT reuse "O" rings. Lubricate NEW "O" rings with oil and install onto regulator. Replace filter screen as necessary. Install retaining ring.

To install, reverse removal procedure. Install NEW plastic quick connector retainers onto fuel filter/pressure regulator. Remove plugs from fuel pipes. Tighten fuel filter/pressure regulator bracket nut to specification. See TORQUE SPECIFICATIONS .