Code Enable Criteria

Conditions for running DTC:

• DTCs P0101, P0102, P0103, P0106, P0107, P0108, P0122, P0123, P0506, P0507, P1106, P1107, P1121 or P1122 is not set
• Engine is running for more than 2 minutes.
• Engine coolant temperature is greater than 158°F (70°C).
• MAP is less than 43 kPa for a TP sensor skewed high test.
• MAP is greater than 67 kPa for a TP sensor skewed low test.
• MAP is steady for 2 seconds or more.
• TP does not varying greater than 1.5 percent for 2 seconds or more.

Conditions for setting DTC:

• TP sensor reading is greater than a predicted value when the MAP is less than 43 kPa.
• TP sensor reading is less than a predicted value when the MAP is greater than 67 kPa.
• Conditions are present for one second.