LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2000 >> Intrigue GLS >> Repair and Diagnosis >> External Pages >> Different car >> Section 589 (Power Seat System) >> Repair Instructions >> Seat Back Recliner Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the recliner to the seat cushion frame.
    NOTE: Refer to FASTENER NOTICE .
  2. Install the recliner to seat back frame pivot bolts.

    Tighten 

    Tighten the recliner to seat back frame pivot bolts to 24 N.m (18 lb ft).

  3. Install the recliner to seat cushion frame roll pins. Use new roll pins.
    Fig 1: Installing Recliner To Seat Cushion Frame Roll Pins
    G01833202Courtesy of GENERAL MOTORS CORP.
  4. Close the J-retainers on both side of the seat cushion cover.
  5. Install the front seat. Refer to Seat Replacement - Front Bucket .
    Fig 2: Closing J-Retainers On Both Side Of Seat Cushion Cover
    G01833203Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals