LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2000 >> Intrigue GL >> Repair and Diagnosis >> External Pages >> Different car >> Section 561 (Wiper System And Washer System) >> Repair Instructions >> Washer Solvent Container Level Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the washer solvent from the washer solvent container.
  2. Remove the right front fender liner. Refer to FRONT FENDER LINER REPLACEMENT
  3. Disconnect the washer solvent container level sensor electrical connector.
  4. Using a small flat-bladed tool, remove the washer solvent level sensor from the washer solvent container.
  5. Using a small flat-bladed tool, remove the seal from the washer solvent container.
    Fig 1: Removing Washer Solvent Level Sensor, Electrical Connector & Seal
    G01830672Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals