LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2000 >> Intrigue GL >> Repair and Diagnosis (Single Page) >> General Information >> Computer Relearn Procedures >> Relearn Procedures (Cars) >> ALERO, Grand Am & MALIBU >> Electronically Erasable Programmable Read Only Memory (EEPROM) Programming (2.4L)

Electronically Erasable Programmable Read Only Memory (EEPROM) Programming (2.4L)

  1. If Powertrain Control Module (PCM) was replaced, the EEPROM in the PCM must be programmed. If EEPROM is not programmed, a Diagnostic Trouble Code (DTC) will be set in the PCM or PCM may be damaged. Perform EEPROM programming using the Techline equipment manufacturer's instructions and latest software applicable for the vehicle model.
  2. Once EEPROM is reprogrammed, the Crankshaft Position (CKP) sensor variation learn procedure must be performed. See CRANKSHAFT POSITION (CKP) SENSOR VARIATION LEARN PROCEDURE (2.4L).
scientia non olet · About LEMON Manuals