LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2000 >> Intrigue GL >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Anti-Lock Brake System - Traction Control System - BOSCH 5.3 >> Removal & Installation >> Electronic Brake Traction Control Module (EBTCM) >> Installation

Electronic Brake Traction Control Module (EBTCM): Installation

  1. To install, clean BPMV gasket surface with alcohol. Install NEW wave spring(s) in original location and position between EBTCM and BPMV. Install EBTCM to BPMV. Install 4 NEW top mounting screws and tighten in an "X" pattern. Install 2 NEW bottom screws and tighten. See TORQUE SPECIFICATIONS  .
  2. Connect pump motor connector at bottom of EBTCM. Connect EBTCM harness connector and push in lock tab. Turn ignition on, with engine off. Perform DIAGNOSTIC SYSTEM CHECK  under DIAGNOSIS & TESTING.
scientia non olet · About LEMON Manuals