LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2000 >> Bravada >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Trouble Shooting >> System Check

System Check

  1. Drive vehicle at a speed greater than 25 MPH. Move cruise control main switch to ON position. Press SET button once and release. Remove foot from accelerator pedal. If vehicle maintains set speed, go to next step. If vehicle does not maintain set speed, go to CRUISE CONTROL INOPERATIVE/MALFUNCTIONING  and/or CRUISE CONTROL INOPERATIVE/MALFUNCTIONING (USING TESTER J42958)  under SYSTEM TESTS.
  2. Hold slider switch in R/A position until vehicle speed increases 4-5 MPH the release. Vehicle should accelerate and maintain new set speed. Press SET button until vehicle speed decreases 4-5 MPH then release. Vehicle should decelerate and maintain new set speed. If system operates as described, go to next step. If system does not operate as described, go to CRUISE CONTROL INOPERATIVE/MALFUNCTIONING  and/or CRUISE CONTROL INOPERATIVE/MALFUNCTIONING (USING TESTER J42958)  under SYSTEM TESTS.
  3. Depress brake pedal slightly. Cruise control system should disengage. Press slider switch to R/A position once and release. Vehicle should accelerate and maintain previously set speed. Depress clutch pedal. Cruise control system should disengage. Press slider switch to R/A position once and release. Vehicle should accelerate and maintain previously set speed. Briefly press (tap) R/A switch. Vehicle speed should increase one MPH. Briefly press (tap) SET button. Vehicle speed should decrease one MPH. If system operates as described, go to next step. If system does not operate as described, go to CRUISE CONTROL INOPERATIVE/MALFUNCTIONING  and/or CRUISE CONTROL INOPERATIVE/MALFUNCTIONING (USING TESTER J42958)  under SYSTEM TESTS.
  4. Simultaneously press SET button and R/A switch. Cruise control system should disengage, but retain previously set speed in memory. Move main switch to OFF position. Cruise control system should disengage, and set speed should be erased from memory. If cruise control system does not function as specified, go to CRUISE CONTROL INOPERATIVE/MALFUNCTIONING  and/or CRUISE CONTROL INOPERATIVE/MALFUNCTIONING (USING TESTER J42958)  under SYSTEM TESTS.
scientia non olet · About LEMON Manuals