Method 1 (No Tool Required)
NOTE:
If the ignition switch is moved to the OFF position or any vehicle door is opened during this procedure, the remote unlock verification customization will be terminated and the system will remain in the most recent mode.
- Sit in driver's seat. Close all doors. Turn ignition switch to the RUN position.
- Depress and HOLD door LOCK switch to the LOCK position.
- Press the transmitter LOCK button. The chime will bong one to 4 times, equal to the current customization mode, to indicate which mode the vehicle is in. Each additional time the transmitter LOCK button is pressed, the mode number will advance. A transition past mode 4 will repeat starting again at mode one.
- Release the door LOCK switch from the LOCK position when the desired mode has been indicated by the chime. Mode indication and effect
- Mode 1-Disabled
- Mode 2-Horn Only
- Mode 3-Headlamps Only
- Mode 4-Horn and Headlamps
- Turn the ignition switch to the OFF position.