Changing Last Door Closed Locking Mode

The last door closed locking mode may be changed with a scan tool or with the door lock switch method. To change last door locking mode with a scan tool, refer to scan tool manufacturers instructions.

Perform this procedure to change the last door closed locking mode using the door lock switch method:

1. Close all vehicle doors.
2. Turn the ignition switch to RUN position.
3. Step firmly and hold brake pedal.
4. Press and hold unlock on either door lock switch.
5. While holding unlock on the door lock switch, shift the transaxle out of PARK then back into PARK.
6. To change the last door closed locking mode shift the transaxle out of PARK then back into PARK again.