LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1999 >> Eighty-Eight Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Axle Shafts - Front) >> Torque Specifications

Torque Specifications

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1996 Pontiac Bonneville, 1996 Oldsmobile Ninety-Eight, 1996 Oldsmobile LSS, 1996 Oldsmobile Eighty-Eight, and 1996 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Axle Shaft Hub Nut 107 (145)
Brake Caliper Bolt 38 (52)
CV Boot Clamp
Large Boot Clamp 130 (176)
Small Boot Clamp 100 (136)
Hub & Bearing Assembly Bolts 70 (95)
Stabilizer Shaft Link Bolt 13 (18)
Wheel Lug Nut 100 (136)
INCH Lbs. (N.m) 
Ball Joint-To-Steering Knuckle Nut (1)
(1) Tighten to 89 INCH lbs. (10 N.m), then turn nut additional 120 degrees (2 flats). Minimum torque of 41 ft. lbs. (56 N.m) must be obtained. To align cotter pin slot, tighten nut up to one more flat.