LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1999 >> Cutlass GLS, 3.1 M >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window System >> Removal & Installation >> Window Motor (Door Control Module) >> Removal & Installation (Rear)

Removal & Installation (Rear)

  1. Lower window to full down position. Remove retaining screw from inside door handle pull cup. Remove power door lock and window switches. See WINDOW & DOOR LOCK SWITCHES . Remove inside door handle pull cup.
  2. Remove door handle plug to access door trim handle screws. Remove door trim handle screws. To release door trim panel from retainers, gently pry outward, starting at bottom rear corner. Remove door trim panel from vehicle and set aside.
  3. Remove enough of water deflector to gain access to window regulator. Disengage glass sash regulator from window. Remove retaining screws from trim at edge of door frame. Remove trim from edge of door frame. Remove window from door.
  4. Disconnect electrical connector from window regulator. Remove window regulator bolts and window regulator. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals