Automatic Door Lock

Program the ADL feature using the following 4 different lock and unlock modes:

1. ADL Mode 0
   
   No automatic door lock or unlock.
2. ADL Mode 1
   
   All of doors lock automatically when the transmission shifts out of PARK, but doors do not auto unlock.
3. ADL Mode 2
   
   All of doors lock automatically when the transmission shifts out of PARK. The driver door unlocks automatically when the transmission shifts into PARK.
4. ADL Mode 3
   
   All of doors lock automatically when the transmission shifts out of PARK. All doors unlock automatically when the transmission shifts into PARK.

To program ADL, perform the following operations.

1. Turn ON the ignition.
2. Place the vehicle in Park.
3. Close all of the doors.
4. Press and hold the door lock switch in the lock position.
5. While holding the door lock switch, press the LOCK button on the vehicles transmitter.
6. After the initial activation of the transmitter LOCK button, each additional activation will increment the ADL mode 1, from the current ADL mode. If cycled beyond ADL Mode 3, the RFA module will enter ADL Mode 0.
7. During this customization procedure, the Automatic Door Lock and Unlock module will provide the customer with feedback of the current ADL Mode.
8. When the door lock switch is released, the RFA module will remain in the recent ADL Mode. Since Mode 0 has no ADL functions, no feedback occurs.

If the ignition voltage is lost or if any door is opened while in the customization procedure, the following actions occur:

• The ADL procedure will terminate.
• The RFA module will remain in the most recent mode.