Turn Signal/Hazard Switch
WARNING: This page is about a different car, the 1998 Oldsmobile Aurora and 1998 Buick Riviera. However, it is still accessible from the selected car via links, so may be relevant.
Turn ignition off. Disconnect 48-pin connector C202, located behind instrument panel left of steering column. Using DVOM, check for continuity between specified terminals with turn signal switch in specified position. See TURN SIGNAL SWITCH CONTINUITY TEST table. If continuity does not exist as indicated, repair as necessary. See WIRING DIAGRAMS for terminal identification.
TURN SIGNAL/HAZARD SWITCH CONTINUITY TEST
| Switch Position | (1) Continuity Between Terminals (Wire Color) | ||
|---|---|---|---|
| Left Turn On | A4 (PPL) & A7 (LT BLU); A4 (PPL) & A3 (YEL); A8 (TAN) & A10 (ORN); A1 (WHT) & A2 (DK GRN) | ||
| Right Turn On | A4 (PPL) & A6 (DK BLU); A4 (PPL) & A2 (DK GRN) A8 (TAN) & A9 (BLK); A1 (WHT) & A6 (DK BLU) | ||
| Hazard On | A5 (BRN) & A3 (YEL); A5 (BRN) & A2 (DK GRN); A5 (BRN) & A7 (LT BLU); A5 (BRN) & A6 (DK BLU) | ||
|
|||