Passenger Temperature Offset Does Not Function Properly
WARNING: This page is about a different car, the 1998 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
- Perform NORMAL SYSTEM RESPONSE TEST . Outside temperature should be at 48°F (8°C) or greater. Start vehicle and bring to operating temperature. Set A/C-heater control air delivery mode to PASS ZONE and set temperature to 85°F (8°C). Set Passenger Climate Control (PCC) to coolest setting. If outlet temperature differential is 8 to 15°F (-4 to -11°C), go to next step. If outlet temperatures do not differ as specified, go to step 4).
- Set temperature on A/C-heater control to 65°F (18°C), set PCC to hottest setting. If outlet temperature differential is 8 to 15°F (-4 to -11°C), go to next step. If outlet temperatures do not differ as specified, go to step 4).
- System operating as designed. Explain operation to customer.
- Check door actuator for proper mounting, broken components or non-attached linkage rods.