Torque Specifications
WARNING: This page is about a different car, the 1998 Pontiac Bonneville and 1998 Oldsmobile Eighty-Eight. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Compressor-To-Bracket Rear Bolt | 74 (100) | |
| Compressor-To-Bracket Front Nuts | 37 (50) | |
| Compressor Bracket-To-Engine Side Bolts | 74 (100) | |
| Compressor Bracket-To-Engine Rear Bolt | 37 (50) | |
| Compressor Hose Manifold Bolt | 22 (30) | |
| Condenser Inlet/Outlet Line | 18 (24) | |
| Drive Belt Tensioner Bolt | 37 (50) | |
| Orifice Tube Dual "O" Ring Joint | 18 (24) | |
| Refrigerant Lines | ||
| 3/8" Diameter | 12 (16) | |
| 1/2" Diameter | 18 (24) | |
| INCH Lbs. (N.m) | ||
| A/C Temperature Valve Actuator Screws | 12 (1.4) | |
| Accumulator Bolt | 53 (6.0) | |
| Blower Motor Screws | 53 (6.0) | |
| Blower Motor Resistor Screws | 34 (3.8) | |
| Condenser Bolts | 106 (12.0) | |
| Evaporator Case Cover Screws | 44 (5.0) | |
| Heater Case Cover Screws | 12 (1.4) | |
| Instrument Panel Bracket Bolts | 84 (9.5) | |
| Instrument Panel Support Nuts | 93 (10.5) | |
| Pressure Cycling Switch | 44 (5.0) | |
| Steering Column Support Bolts | 106 (12.0) | |