LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1998 >> Intrigue Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Overhaul & Testing - 4T60-E >> Transaxle Disassembly >> Drive Link Assembly

Drive Link Assembly

NOTE: See Figure for exploded view of all internal components (from drive link support to final drive carrier assembly). See Figure for thrust washer and bearing locations. See Figure for lip seal locations.
  1. Remove "O" ring seal from turbine shaft. See Figure . Remove turbine shaft drive sprocket, driven sprocket and drive link chain together as an assembly. Note position of master link on drive link chain. Link is a different color then other links. Master link may be Bronze and be facing up or down. Original link MUST be installed in same direction as removed during installation. NEW link must be installed with colored link facing up.
  2. Remove drive sprocket and driven sprocket thrust washers from between sprockets and channel plate. Remove chain scavenging scoop and driven sprocket support with 4th clutch thrust washer. See Figure .
scientia non olet · About LEMON Manuals