LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1998 >> Cutlass GL >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft System >> Programming >> Auto Learn

Auto Learn

NOTE: This procedure must be performed after ignition switch replacement.

Clear all DTCs. Follow scan tool manufacturer's instructions. With transmission in Park (A/T) or Neutral (M/T), turn ignition switch to START position. Vehicle should start and then stall. Leave ignition in RUN position (engine off) until THEFT SYSTEM indicator turns off (about 10 minutes). Turn ignition off for 10 seconds. Turn ignition switch to RUN position. On next start attempt, Body Function Controller (BFC) will learn new data. Reprogram PCM. See TESTS W/CODES article in ENGINE PERFORMANCE section.

scientia non olet · About LEMON Manuals