Strut Assembly: Installation
- Before installation, modify strut mounting flange to allow for camber adjustment during wheel alignment. File bottom mounting holes on strut outer flanges to enlarge holes until they match slots on inner flanges. See Fig 2.
- To install, reverse removal procedure. If installing old strut assembly, align marks made during removal. When installing bolts that secure strut assembly to steering knuckle, ensure machined flats on bolt heads are horizontal. Tighten fasteners to specification. See TORQUE SPECIFICATIONS table. Check wheel alignment. See SPECIFICATIONS & PROCEDURES - CARS - EXCEPT SATURN
article in WHEEL ALIGNMENT.
Courtesy of GENERAL MOTORS CORP.
Courtesy of GENERAL MOTORS CORP.