LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1997 >> Regency >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Engine Controls - Remove/Install/Overhaul 3.8L) >> Fuel System >> Oxygen Sensor >> Installation

Oxygen Sensor: Installation

WARNING: This page is about a different car, the 1998 Pontiac Bonneville, 1998 Oldsmobile Regency, 1998 Oldsmobile LSS, 1998 Oldsmobile Eighty-Eight, and 1998 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
  1. Whenever an oxygen sensor is removed, coat threads with anti-seize compound before installation. New oxygen sensors already have this compound applied to threads.
  2. Install oxygen sensor in exhaust pipe. Tighten oxygen sensor to 30 ft. lbs. (41 N.m). Reconnect electrical connector to oxygen sensor. Reconnect negative battery cable.
scientia non olet · About LEMON Manuals