All Memory, Seat & Mirror Functions Inoperative
- If diagnostic system check was performed, go to next step. If diagnostic system check was not performed, go to DIAGNOSTIC SYSTEM CHECK .
- Disconnect memory seat/memory mirror control module connector C1. Using DVOM, check voltage between memory seat/memory mirror control module harness connector C1 terminal "A" (Orange wire) and ground. If reading is about 12 volts, go to next step. If reading is not about 12 volts, go to step 5).
- Check voltage between memory seat/memory mirror control module harness connector C1 terminals "A" (Orange wire) and "B" (Black wire). If reading is about 12 volts, go to next step. If reading is not about 12 volts, go to step 6).
- Replace memory seat/memory mirror control module. Perform DIAGNOSTIC SYSTEM CHECK .
- Repair open or short to ground in Orange wire between memory seat/memory mirror control module connector C1 and instrument panel fuse block. Perform DIAGNOSTIC SYSTEM CHECK .
- Repair open in Black wire between memory seat/memory mirror control module connector C1 and ground. Perform DIAGNOSTIC SYSTEM CHECK .