LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1997 >> Eighty-Eight Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Supplemental Inflatable Restraint System) >> Removal & Installation >> Air Bag Module >> Installation (Driver-Side)

Installation (Driver-Side)

WARNING: This page is about a different car, the 1997 Oldsmobile Aurora and 1997 Buick Riviera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Reconnect air bag connector and CPA clip. Route horn contact lead through steering wheel into cam tower and rotate clockwise into locked position. Connect horn ground lead and steering wheel control switch connector, if equipped. Install air bag module to steering wheel, ensuring no wires are pinched. Tighten air bag module screws through back of steering wheel. Tighten screws to specification. See TORQUE SPECIFICATIONS  . On the Aurora, install steering wheel inserts.
  2. Reactivate air bag system. See ACTIVATING SYSTEM  . Ensure proper system function. See SYSTEM OPERATION CHECK  .
scientia non olet · About LEMON Manuals