LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1997 >> Cutlass Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Bleeding Brake System >> Manual Bleeding >> ABS Modulator Assembly (Bleeding)

ABS Modulator Assembly (Bleeding)

  1. Ensure reservoir is full. Attach a clear hose to rear bleeder valve and submerge other end of hose in a container of clean brake fluid. See Figure .
  2. Depress and hold brake pedal. Slowly open rear bleeder valve and allow fluid to flow. Close valve and release brake pedal. Wait 5 seconds, repeat procedure until no air bubbles are seen in hose. Repeat procedure for front bleeder valve.
scientia non olet · About LEMON Manuals