LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1996 >> Ninety-Eight >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Suspension - Front) >> Torque Specifications

Torque Specifications

WARNING: This page is about a different car, the 1996 Pontiac Bonneville, 1996 Oldsmobile LSS, 1996 Oldsmobile Eighty-Eight, and 1996 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Axle Shaft Nut 107 (145)
Ball Joint-To-Control Arm Bolt/Nut 50 (68)
Brake Caliper Bolt 38 (52)
Hub & Bearing Assembly Bolt 70 (95)
Lower Control Arm-To-Frame Bolt
Front 140 (190)
Rear 91 (123)
Stabilizer Bar
To Control Arm (Nut) 13 (18)
To Crossmember (Bolt) 35 (47)
Strut Assembly
To Steering Knuckle (Bolt) 140 (190)
To Upper Body Mount (Nut) 18 (24)
Rod (Shaft) Nut 55 (75)
Tie Bar Through-Bolts 27 (37)
Tie Rod End Nut (1) 35 (47)
Wheel Lug Nut 100 (136)
INCH Lbs. 
Ball Joint-To-Steering Knuckle Nut (2) 88 (10)
(1) Tighten nut to specification, then tighten nut further only as far as necessary to align cotter pin hole.
(2) Tighten an additional 2 flats to 41 ft. lbs. (56 N.m) minimum, then tighten nut further only as far as necessary to align cotter pin hole.