LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1996 >> Eighty-Eight Base >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul 3.8L >> Fuel System >> Map Sensor >> Removal (VIN K)

Removal (VIN K)

NOTE: On VIN K, the MAP sensor is mounted to the PCV valve cover. See Figure.

Disconnect the MAP sensor electrical connector. Carefully bend the locking tabs holding the MAP sensor (1) to the PCV valve cover (2) just enough to remove the MAP sensor. Pull the MAP sensor straight out of PCV valve cover.

scientia non olet · About LEMON Manuals