LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1996 >> Aurora >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Testing >> Rev Test >> Using Scan Tool

Using Scan Tool

  1. Using scan tool, command PCM to enable cruise control system. Set parking brake and start engine. Move main switch to OFF position, then to ON position. After 3 seconds, depress and hold SET button. Hold slider switch in Resume/Accelerate (R/A) position. Fully depress and hold brake pedal.
  2. After 10 seconds, release brake pedal. Engine RPM should increase slightly, then return to idle. Clear any Diagnostic Trouble Codes (DTCs) which may be set.
scientia non olet · About LEMON Manuals