No Pusher Fan: Notes
NOTE:
Test numbers refer to numbers on diagnostic charts.
- Test light should be on because relay harness terminals No. 85 and 87 have battery voltage with ignition on.
- Jumpering relay harness terminals No. 30 and 87 by-passes pusher fan relay. If pusher fan runs, pusher fan relay is faulty.
- Checks circuit No. 473 back to PCM. If circuit No. 473 is okay, pusher fan relay is bad.
- Checks wiring to pusher fan motor. If wiring is okay, problem is connections, pusher fan motor or motor ground.