Set Condition

Code P1567 will set when the following conditions are present.

• ON/OFF switch is open between cruise engage switch and PCM.
• SET/COAST switch is indicated closed for more than 7 1/2 minutes (switch problem).
• RESUME/ACCEL switch is indicated closed for more than 7 1/2 minutes (switch problem).
• Cruise brake signal is open to PCM (no change in status of cruise brake switch) when vehicle makes 5 stops from 35 MPH (for more than 10 seconds) down to zero MPH.
• Any circuit is shorted to voltage.
• One of the listed conditions are met.