Alignment Specifications
WARNING: This page is about a different car, the 1995 Chevrolet Monte Carlo. However, it is still accessible from the selected car via links, so may be relevant.
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Preferred | Range | ||
|---|---|---|---|---|
| Camber (Degrees) Front | 0.7 | 0.2 to 1.2 | ||
| Camber (Degrees) Rear | -0.35 (1) | -0.85 to 0.15 | ||
| Caster (Degrees) Front | 1.8 | 1.3 to 2.3 | ||
| Caster (Degrees) Rear | N/A | N/A | ||
| Toe-In (Inches) Front | 0 | -0.1 to 0.1 | ||
| Toe-In (Inches) Rear | 0 | -0.15 to 0.15 | ||
| Toe-In (Millimeters) Front | 0 | -2.5 to 2.5 | ||
| Toe-In (Millimeters) Rear | 0 | -4 to 4 | ||
| Toe-In (Degrees) Front | 0 | -0.2 to 0.2 | ||
| Toe-In (Degrees) Rear | 0 | -0.3 to 0.3 | ||
| Wheelbase (Inches) | N/A | 107 1/2 | ||
| Wheelbase (Millimeters) | N/A | 2731 | ||
|
||||