LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1995 >> Achieva SC, 2.3 D, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Rail & Injectors >> Removal (2.3L)

Removal (2.3L)

  1. Relieve fuel pressure. See FUEL PRESSURE RELIEF . Disconnect negative battery cable. Remove vacuum hoses from crankcase ventilation oil/air separator. DO NOT  remove vacuum hoses from canister purge solenoid valve. Remove bolts retaining crankcase ventilation oil/air separator and canister purge solenoid valve. Position canister purge solenoid valve aside, and remove crankcase ventilation oil/air separator.
  2. Disconnect vacuum hose at pressure regulator. Disconnect and plug fuel return line at pressure regulator. Disconnect and plug fuel inlet line at fuel rail. Push in on injector connector clip and disconnect electrical connectors from injectors. Remove fuel rail retaining bolts. Remove fuel rail from intake manifold using equal force on both sides of fuel rail. See Figure.
  3. Remove injector-to-fuel rail retaining clip. Remove injector from fuel rail. Remove injector "O" rings and discard.
scientia non olet · About LEMON Manuals