LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1994 >> Cutlass Cruiser >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul - 3T40 >> Component Disassembly & Reassembly >> Transaxle Case >> Inspection

Transaxle Case: Inspection

  1. Inspect case assembly for damage, cracks, porosity and interconnected oil passages. Ensure exhaust vent holes are open. Inspect for stripped bolt holes.
  2. Check case lugs, intermediate servo bore and snap ring grooves. Inspect case bushings for wear or scoring. Inspect drive and driven sprocket support bearing assemblies for pitting and scoring to carrier and rollers. Check rollers for excessive clearance.
  3. Inspect drive and driven sprocket supports for damage to journal splines. Check for heat discoloration and cracks on support assembly. Inspect governor pipe for damage, cracks and leakage. Check parking pawl shaft cup plug, parking pawl shaft and parking pawl for damage and excessive wear. Inspect 3rd oil cup plug for tightness in bore or damage. Check all sealing and mating surfaces for straightness.
scientia non olet · About LEMON Manuals