LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1994 >> Cutlass Cruiser >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Instrument Panel - Analog >> Testing >> Notes

Instrument Panel - Analog: Testing: Notes

NOTE: When testing suspect gauges/indicators, refer to appropriate illustrations to identify instrument cluster terminals. Instrument cluster connector illustration for Cutlass Cruiser is not available from manufacturer. See INSTRUMENT CLUSTER CONNECTOR TERMINAL IDENTIFICATION (CUTLASS CRUISER) table to identify instrument cluster terminals.
INSTRUMENT CLUSTER CONNECTOR TERMINAL IDENTIFICATION (1)

Terminal Circuit Description Wire Color/Number
Connector C1
C1 Ignition Input Pink (39)
C2 HI Beam Indicator W/Daytime Running Lights White (629)
C2 HI Beam Indicator W/O Daytime Running Lights **
" ******** Light Green (11)
C3 Right Turn Indicator Dark Blue (15)
C4 Vehicle Speed Input Dark Green (389)
C5 BRAKE Indicator Tan/White (33)
C6 Ignition Input Pink (39)
C7 Ground Black/White (251)
C8 Not Used Not Used
C9 Ground Black (150)
C10 FASTEN BELTS Indicator Yellow (237)
C11 ANTI-LOCK Brake Indicator Light Green/Black (875)
C12 SERVICE ENGINE SOON Indicator Brown/White (419)
C13 CHARGE Indicator Brown (25)
C14 Not Used Not Used
C15 AIR BAG Indicator Brown (358)
C16 OIL PRESSURE Indicator Tan (31)
C17 Fuel Gauge Input Purple (30)
C18 Ground Black (150)
Connector C2
C1 Not Used Not Used
C2 Ground Black (150)
C3 Illumination Gray (8)
C4 Not Used Not Used
C5 Not Used Not Used
C6 Not Used Not Used
C7 Left Turn Indicator Light Blue (14)
C8 Ground Black (150)
C9 TAILGATE AJAR Indicator (Cutlass Cruiser) Dk Green (146)
C10 LOW TRACTION Indicator Dark Blue (1537)
C11 Not Used Not Used
C12 Engine Coolant TEMP Indicator Dark Green (35)
C13 Engine Coolant TEMP Gauge Input Dark Green (135)
C14 Not Used Not Used
C15 Ground Black (150)
C16 Ignition Input Pink (39)
C17 Not Used Not Used
C18 Not Used Not Used
(1) G105 (VIN 4) is located on transaxle stud, under intake manifold. G112 (VIN M) is located On transaxle stud, rear of starter solenoid. G202 is located at right shroud, near center access hole.