Alternator & Regulator: Operation
Regulator voltage varies to compensate for temperature. Voltage is regulated by controlling rotor field current. The regulator switches rotor field current on and off at a fixed frequency of about 400 cycles per second.
The regulator has 4 terminals: "P", "L", "I" and "S". See Fig 1 . The "L" terminal and/or the "I" terminal is used to turn on regulator and allows field current to flow when ignition switch is turned to START or RUN position. The "L" terminal is connected through a charging indicator light or resistor. The "I" terminal is connected to positive battery terminal either directly or through a resistor. These terminals are often used in parallel and are connected to 2 different vehicle circuits.
The "P" terminal is connected internally to the stator and may be wired to a tachometer or other device. The "S" terminal may be used to sense voltage at another vehicle location for voltage control. If "S" terminal is not used, alternator uses an internal sensor for voltage control.