Fuel Pressure Relief (PFI)

WARNING: This page does not describe the selected car, but rather 39 other vehicles, including the 1992 Saturn SL2, 1992 Saturn SL1, 1992 Saturn SL, 1992 Saturn SC, and 1992 Pontiac Sunbird. However, it is still accessible from the selected car via links, so may be relevant.

Fuel system is under pressure. Pressure must be relieved prior to servicing fuel system. Fuel pressure may be relieved by using one of the following methods.

On all models, disconnect fuel pump at rear body connector. Start engine and run engine until it stalls. Crank starter for 3 seconds to remove remaining fuel from fuel lines. Reconnect rear body connector.
On all models except 2.0L and 2.2L, install Fuel Pressure Gauge (J-34730-1) on fuel pressure connector of fuel rail. On 2.0L and 2.2L, install TBI Fuel Pressure Gauge (J-29658-D) using Adapter Kit (J-29658-100). Wrap shop towel around pressure connection when installing fuel pressure gauge to absorb fuel leakage. Install gauge bleed hose in container. Open bleed valve to bleed fuel pressure.