LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1994 >> Achieva SC, 2.3 A >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Ignition Module (IDI) >> Removal & Installation (2.3L)

Removal & Installation (2.3L)

  1. Disconnect negative battery cable. Disconnect 11-pin harness connector. Remove 4 IDI cover assembly-to-cam carrier bolts. Remove ignition system assembly from engine. Remove 4 coil housing-to-cover screws. Remove housing cover.
  2. Remove coil harness connector from module. Remove module-to-cover screws. Remove module from cover. To install, reverse removal procedure. Tighten screws and bolts to specification. See appropriate TORQUE SPECIFICATIONS .
NOTE: DO NOT  wipe grease from module or coil if module is not being replaced. If installing a new module, spread silicone grease on metal face of module and on cover where module seats. Grease is included with new module and is necessary for module cooling purposes.
scientia non olet · About LEMON Manuals