LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1992 >> Toronado Base >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Crankshaft/Combination Sensor C3I >> Removal (3.3L & 3.8L)

Removal (3.3L & 3.8L)

  1. Remove serpentine belt from crankshaft pulley. Raise vehicle on hoist. Remove right front tire and wheel assembly. Remove right inner fender access cover.
  2. Using 28-mm socket, remove crankshaft harmonic balancer retaining bolt. Remove harmonic balancer. Remove foreign object deflector (DO NOT  use pry bar). Disconnect sensor harness connector. Remove sensor and pedestal (as an assembly) from block. Remove sensor from pedestal.
scientia non olet · About LEMON Manuals