LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1991 >> Toronado Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> Testing & Diagnosis >> Engine Controls - Tests W/Codes - Pcm/BCM >> Flow Charts For ECM/Pcm Codes: EO13 To EO69 >> Code EO38, Brake Switch Circuit >> Notes

Code EO38, Brake Switch Circuit: Notes

Code EO38 will set if no Code EO24 is present, status at brake input terminal of control module has not changed from high to low and vehicle speed has been greater than 35 MPH and back to zero MPH a precalibrated number of times.

NOTE: Test numbers refer to test numbers on diagnostic chart.
  1. Jumpering the brake switch determines if the ECM and wiring for the brake switch are okay.
  2. Determines if brake switch is out of adjustment or is faulty.
  3. Verifies the voltage to the brake switch.
scientia non olet · About LEMON Manuals