LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1991 >> Bravada >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System/Washer System - Standard/Pulse >> Testing >> Wiper System Testing >> Wiper Has High Speed Only

Wiper Has High Speed Only

  1. Disconnect wiper motor wiring harness connector (C155). See Figure or Figure . Turn ignition to ACCY position. Turn wiper switch to LO. Connect test light between terminal No. 91 (Gray wire) and ground. If test light comes on, replace or repair motor. If test light does not come on, go to next step.
  2. Connect test light between terminal No. 91 (Gray wire) of switch connector C340 and ground. Turn ignition to ACCY position. Connect voltmeter between Purple wire of connector C340 and ground. If test light comes on, repair open circuit in Gray wire between wiper switch and wiper motor. If test light does not come on, repair or replace wiper switch.
scientia non olet · About LEMON Manuals