Checking Fluid Level
CAUTION:
DO NOT
overfill. One pint of fluid will raise level from "ADD 1 PT. OR .5L" to "FULL HOT" mark on dipstick with a hot transmission.
- Warm transmission to normal operating temperature by at lease 15 miles of highway driving. With engine at curb idle. move selector lever through all ranges, ending in Park.
- Remove dipstick. Wipe dipstick clean and reinstall. Remove again and inspect level. Fluid level should check between "ADD 1 PT. OR .5L" to "FULL HOT" mark on dipstick.
CAUTION:
If vehicle has been driven for extended period of time at high speed, in city traffic in hot weather, or if vehicle has been pulling a trailer, accurate fluid level cannot be checked until ATF has cooled about 30 minutes after vehicle has been parked.