LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1988 >> Cutlass Supreme SL, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Wiper System/Washer System - Front) >> Overhaul >> Gear Box >> Reassembly

Gear Box: Reassembly

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 1992 Pontiac Grand Prix, 1992 Pontiac Firebird, 1992 Pontiac Bonneville, 1992 Oldsmobile Toronado, and 1992 Oldsmobile Ninety-Eight. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install intermediate gear and NEW intermediate gear retainer. Install inner spacer washer onto large gear tube. Install large gear, spacer washer and shield. Use shim washers to obtain .001-.010" (.03-.26 mm) end play.
    NOTE: Move drive and lock pawls as required to fit respective pins in gear pockets. Ensure drive plate is firmly against gear.
  2. Install retaining ring (in place of thrust collar on original motor). Install rubber seal cap. Install crank arm (check crank arm for proper position in PARK position). See Figure . Tighten crank arm nut to 31 ft. lbs. (42 N.m).
scientia non olet · About LEMON Manuals