Front Wheels
- Loosen, 2 of the 3 top strut attaching nuts covering the slotted mounting holes. Remove nut over remaining oval strut mounting hole. Move washer away from oval strut mounting hole.
- Lift front of vehicle by body to separate strut from inner wheel house. Drill 2 11/32" (8.731 mm) holes at front and rear of oval strut mounting hole. File excess metal.
- Lower front of vehicle. Reinstall washer and nut. Adjust caster by moving top of strut forward or rearward. Set to specifications. Tighten top strut attaching nuts.