Throttle Body Assembly: Removal
- Relieve pressure from fuel lines as explained under Fuel Pump Pressure Test. Remove air cleaner. Disconnect throttle linkage, return spring and cruise control linkage (if equipped). Disconnect and identify all electrical connectors from throttle body.
- Disconnect and identify all vacuum hoses from throttle body for installation reference. Disconnect fuel lines from throttle body using 2 wrenches. Remove 3 throttle body-to-manifold bolts. Model 500 uses 2 long bolts to secure air cleaner isolator and 1 throttle body-to-manifold bolt. Remove throttle body.