LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1984 >> Cutlass Cruiser 3.8 3 >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - Multi-Point >> Removal & Installation >> Oxygen Sensor >> Installation

Oxygen Sensor: Installation

  1. O2 sensor threads must be coated with special anti-seize compound before installation. New sensors will have compound applied to threads.
  2. If old sensor is to be reinstalled, coat with anti-seize compound (5613659). Tighten to 30 ft. lbs. (41 N.m).
scientia non olet · About LEMON Manuals