Pre-Diagnosis Checks
- Before starting any diagnostic routines, make the following general checks first: check all vacuum hoses for proper routing and connections. Check for kinked, cracked or plugged hoses. Inspect all electrical wiring for cracked, frayed or broken wires.
- Make sure the ignition system has proper amount of available voltage. Ensure engine is in good mechanical condition, exhaust system is clear and good quality fuel is present.NOTE: The ECU wiring harness may be difficult to plug into the unit. A locator clip is provided on the harness and it must be aligned with slot on ECU. Check this connection.
- 2) If any of the following vehicle symptoms are noticed, the Electronic Fuel Control system should be checked:
- Detonation
- Stalls or rough idle
- Missing
- Hesitation
- Surges
- Sluggish performance
- Poor economy
- Hard starting
- Excessive exhaust odor
- Cut outs