LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1966 >> Dynamic Base, Eng CD ML, Not Available Trans >> Repair and Diagnosis >> Electrical >> Starter Controls - DELCO-REMY >> Testing & Checking >> Solenoid Windings >> Pull-In Winding

Pull-In Winding

Check in same manner as Hold-In Winding Test, except connect ammeter and voltmeter between solenoid switch terminal and solenoid motor (M or MOT) terminal.

CAUTION: Do not leave pull-in winding energized more than 15 seconds.

Current draw will decrease as winding temperature increases.

scientia non olet · About LEMON Manuals