FRONT FINAL DRIVE : Service Data
| Applied model | Axle | 4WD | |
|---|---|---|---|
| Engine | VK56VD | ||
| Transmission | A/T | ||
| Final drive model | R180A | ||
| Gear ratio | 2.937 | ||
| Number of teeth (Drive gear/Drive pinion) | 47/16 | ||
| Number of pinion gears | 2 | ||
| Drive pinion adjustment spacer type | Collapsible | ||
| Oil capacity | Refer to MAINTENANCE : Recommended Fluid and Lubricants . | ||
Unit: N.m (kg-m, in-lb)
| Item | Standard |
|---|---|
| Pinion bearing (P1 ) | 1.08 - 1.66 (0.11 - 0.16, 10 - 14) |
| Side bearing (P2 ) | 0.588 - 1.078 (0.06 - 0.10, 6 - 9) |
| Side bearing to pinion bearing (Total preload) (Total preload = P1 + P2 ) |
1.668 - 2.738 (0.17 - 0.27, 15 - 24) |
Unit: mm (in)
| Item | Standard | ||
|---|---|---|---|
| Drive gear back face runout | 0.08 (0.0031) or less |
Unit: mm (in)
| Item | Standard |
|---|---|
| Drive gear to drive pinion gear | 0.10 - 0.15 (0.0039 - 0.0059) |
Unit: mm (in)
| Item | Standard |
|---|---|
| Companion flange face runout | 0.10 (0.004) or less |
| Inner side of the companion flange runout | 0.10 (0.004) or less |
Unit: mm (in)
| Item | Standard | ||
|---|---|---|---|
| Side gear backlash (Clearance between side gear and differential case) | 0.10 (0.004) or less (Each gear should rotate smoothly without excessive resistance during differential motion.) |